ADJ LINK DMX Controller

These units are ADJ B-Stock and come with a 90 day manufacturer warranty.  All fixtures are cleaned and tested before leaving the building.

LINK is a 4-universe controller designed to control compatible DMX devices with control from the dedicated Airstream DMX LINK iOS App for iPad (iPad not included). Built for event production, clubs, bars, and small venues, the ADJ LINK DMX Controller combines hands-on hardware controls with iPad-based programming and playback, so you can build cues, trigger looks, and run a show from the console or from around the room.

iPad Control, Wireless or Hardwired

LINK can connect to an IPad wirelessly or hardwired. When connected wirelessly, LINK creates a private standalone 2.4 or 5 GHz DSSS (Direct Sequence Spread Spectrum) WiFi network between an iPad and LINK console, which can coexist in busy RF environments alongside other wireless technologies. Connecting wirelessly will also allow you to undock the iPad and remotely control, program and playback your light show. If you prefer to use a hardwired connection between the IPad and LINK you will need a USB cable adapter, not included, which will also allow the IPad to charge at the same time.

Four DMX Outputs for Reliable Multiverse Distribution

Four (4) hardwired, 5-pin XLR outputs on the rear of LINK send constant and reliable DMX signal to compatible DMX devices. With 4, Hardwired, DMX Universes, it is easier to separate fixtures by stage zones or fixture types and keep cable runs organized in real-world rigs.

Hands-On Playback and Programming Controls

For fast operation during rehearsals and live sets, LINK provides a performance-focused surface with tactile controls for playback, effects, and on-the-fly changes, including:

• (1) Master and (8) Control 100mm Faders
• (16) Page Playback Buttons Above Faders
• (8) Rotary Dials with Push-In Selection Above Faders
• (32) Instant Effect or Scene Calling Buttons
• (8) Bump / Momentary Effect Buttons
• (4) Rotary Encoder Wheels with Push-In Selection
• (6) General Purpose Buttons
• (1) Blackout Button

Connectivity, Mounting, and Onsite Practicality

LINK supports WiFi and DMX512, and includes a USB 2.0 Type “B” Port plus a USB Input for Gooseneck Work Light for better visibility in dark booths. A removable outer case supports 6U rack mounting for mobile production racks and install-friendly setups, and the Kensington Security Device Slot helps secure the controller in shared venues.

Size and Weight

• Length: 20.3” (514mm)
• Width: 13.2” (336mm)
• Vertical Height: 3.5” (88mm)
• Weight: 13.0 LBS. (5.9 kg)