NEW TMB 15ft Proplex 5-Pin DMX Cable (Pkg of 2)

Package of (2) TMB 15ft Proplex 5-Pin DMX Cables, Assembled

Proplex series data cables are built to survive the toughest conditions, yet handle and coil well, again and again and again. They have been exhaustively developed, tested and re-tested. Designed for professional lighting data runs, these 5-pin DMX cables help maintain reliable signal transfer between DMX controllers, splitters, and fixtures in touring, rental, and installed production environments.

Built for Real-World DMX Use

To support consistent performance over longer runs and in electrically noisy environments, Proplex DMX cabling uses a 110 Ohm characteristic impedance (a key requirement for DMX512-style data transmission), along with layered shielding and a rugged jacket that stands up to repeated setup and strike.

Cable Construction and Electrical Specs

• Conductors: 23 AWG (0.34 mm2) tinned, annealed copper stranded 19 x 34
• Insulation: 200° C, 300 Volt FEP; Nom. wall: 0.015” (0.38 mm); Min. wall: 0.013” (0.33 mm)
• Color Code: Black paired with White, Red paired with Green
• Assembly: Pairs cabled with Kevlar strength member
• Inner Shield: Aluminum / mylar, 100% coverage
• Outer Shield: Tinned copper braid, 85% coverage
• Jacket: Black UV-resistant Polyurethane; Nom. wall: 0.060” (1.52 mm); Elongation: 550%; Tensile strength: 5,000 psi; High pressure extrusion
• Outside diameter: 0.285” (7.24 mm) nom.
• Weight: 45 lbs. per 1,000 ft. (64 Kg/Km)
• Conductivity: 14.5 Ohms (max.) per 1,000 ft. @ 25° C
• Characteristic Impedance: 110 Ohms
• Capacitance: 13pf / ft. nom. cond.-to-cond.; 25pf / ft. nom. cond.-to-shield
• Inductance: 0.31 uH / ft. nom.
• Bend Radius: 1.75” minimum