Wahlberg DMX Snow Machine

This Wahlberg DMX Snow Machine shows minor wear and is in like new condition. Designed for stage and event use, it creates controlled artificial snowfall effects using a rotating drum system, and it can also be used with confetti for similar falling effects.

With our DMX Snow Machine, you can very easily create artificial snowing effects for your stage.

It is designed with a motor and a drum with small holes. Fill your artificial snow (or confetti if you are to use it as a confetti machine) in the tube with small holes and you are ready to go. When the motor is rotating the tube, the snow/confetti slowly falls out of the tube to create the desired snowing effect.

You can control the speed of the machine which also means that you can control the speed of which the material is falling out of the tube. This makes it easier to match the effect to cues, music, and scene changes, from a light flurry to a more continuous fall.

DMX Control for Cue-Based Snow Effects

The machine supports DMX512 control (6 channels used) for integration into lighting and show control workflows. It features 5-pin XLR DMX in/out for straightforward cabling through a DMX line.

Drum Design and Output Control

The hexagonal drum measures 235 x 1800 mm (9.3 x 70.9 in) with 12.5 mm (0.5") snow holes, and the variable drum speed range of 10 to 110 rpm provides practical control over how quickly material is dispensed.

Power, Duty Cycle, and Physical Specs

• Power supply: 100 to 240 VAC, 50/60 Hz
• Power consumption: 150 W (1.5 to 0.63A)
• Motor: 24 VDC, 92W
• Duty cycle: 50% when running more than 30 minutes
• Load capacity: 56 L (14.8 gal)
• Dimensions: 1960 x 235 x 356 mm (77.2" x 9.3" x 14")
• Weight: 15 kg (33.1 lb)

Ships from outside of the United States