KV2 VHD5.0 Speaker Audio Package
Description
Ships from outside of the United States
This listing is for KV2 VHD5.0 Speaker Audio Package. These items were used in a nightclub for about 5 years. They show wear and tear but are in good working condition.
Included in this package are:
- (2) VHD5.0 Mid Hi Speaker
- (6) VHD8.10 Low Mid Speaker
- (2) VHD5000 Amplifier
- (2) VHD5000S Low/Mid Amplifier
VHD5.0 Mid Hi Speaker: The VHD5.0 is a three‑way enclosure handling low mids, mids and highs over a frequency range from 45Hz through to 20kHz. It incorporates eight front‑loaded ten inch low mid drivers, six horn‑loaded eight inch mid range drivers and three 3“ NVPD (Nitrate Vapour Particle Deposition) Titanium compression drivers on a custom designed, manifold horn assembly with summing waveguide. With the capacity to run full range down to 45Hz the VHD5.0 is usually crossed over at 70Hz to the VHD4.21 Active Sub Bass Modules. Both the VHD5.0 and VHD8.10 cabinets incorporate very simple to use integrated fly ware that links cabinets together quickly and easily.
Features:
- Max SPL Long‑term: 147dB (with VHD8.10)
- Max SPL Peak: 153dB (with VHD8.10)
- ‑3dB Response: 50Hz to 20kHz (with VHD8.10)
- ‑10dB Response: 45Hz to 22kHz (with VHD8.10)
- Full Range mode: ‑3dB Response 45Hz to 20kHz (with VHD8.10)
- Crossover Point: 70Hz, 400Hz, 2.0kHz (with VHD8.10)
- Cabinet Material: Baltic birch
- Handles: 6
- Color: Black (wear resistant polymer coating)
- Dimensions (HxWxD): 1125 x 1110 x 500 mm (44.29" x 43.7" x 19.69")
- Weight: 151kg (332.2lbs)
VHD8.10 Low Mid Speaker: When multiple low mid drivers are arrayed on a single axis they sum providing a considerable increase in the amount of low mid energy present and available in the 200Hz to 500Hz range. A lot more energy is needed in this area than in the higher frequency ranges so this summing effect helps deliver headroom in the system and keeps the overall sound balanced. To provide the required energy in the low mid, needed to cover very large audiences KV2 developed the VHD8.10 Low Mid Expansion Box. This enclosure carries a further 8 front‑loaded ten inch speakers and 3 of these cabinets are added to each VHD5. 0. This provides a total of 32 ten inch speakers giving the extra headroom needed in the low mid band and extended projection of these frequencies over distance.
Features:
- Max SPL Long‑term: 135dB
- Max SPL Peak: 141dB
- ‑3dB Response: 45Hz to 400Hz (45Hz to 1100Hz when used standalone)
- ‑10dB Response: 45Hz to 400Hz (45Hz to 4200Hz when used standalone)
- Sensitivity: 104dB
- Impedance: 4Ω
- Crossover Point: 400Hz
- Cabinet Material: Baltic birch
- Handles: 4
- Color: Black (wear resistant polymer coating)
- Dimensions (HxWxD): 640 x 1110 x 500 mm (25.20" x 43.7" x 19.69")
- Weight: 78 kg (172 lbs)
VHD5000 Control Amplifier: The Main input, fill output and subwoofer outputs are equipped with phase reverse and set level features. The VHD5000 input is "Line Driver Ready", it has an input signal impedance selector switch, (10kOhm and 120Ohm) to match up low impedance signal source when driving long signal cables. In most cases it would be advisable to use a VHD LD4 Line Driver in addition at the mixer outputs, to ensure that the line to the amplifier is driven correctly and the signal integrity maintained.
Features:
- Number of Channels: 1x VHD5.0
- Type: Class AB Push-Pull low IM Mosfet design, transformer balanced output
- Rated Continuous Power: 300W
- Distortion: < 0.02%
- Operating Bandwidth: 2kHz to 30kHz
- Input Channels: XLR
- Input Sensitivity: 1.55V RMS
- Input Impedance: 10kΩ to 120Ω "Line driver ready"
- Input Level Control: -20 / +3dB
- Hi Level Control: -6 / +4dB
- Mid Level Control: fixed
- Low Level Control: -6/ +6dB
- Subwoofer Level Control : -20 / +10dB
- Downfill Level Control: -54 / + 6dB
- Indicators: 5.7" sunlight readable color display
- Remote control: Ethernet
- Dimensions (HxWxD): 177.8 x 481.4 x 495 mm (7" x 18.95" x 19.5")
- Weight: 36 kg (80lbs)
VHD5000S Low/Mid Amplifier: The VHD5000S is a rack mounted, high efficiency, low/mid amplifier, specifically designed in conjunction with VHD5000 for powering the VHD5 low/mid loudspeaker system. The unit contains two separate 2500 watt amplifiers with individual power supplies, signal paths and inputs and outputs within a single four rack space chassis. The unit acts as a slave for the VHD5000, which provides audio and control signal.
Features:
- Type: High efficiency, Current-Enhancing, Switched-Rail Amplifier
- Rated Continuous Power: 2500W
- Min. Load Impedance: 2Ω
- Distortion: <0.05%
- Operating Bandwidth: 20Hz to 450Hz
- Input Channels: XLR
- Input Sensitivity: 1.55V RMS
- Input Impedance: 10kΩ
- Indicators: 2x Power ON/Thermal, Signal/Limiter/Communication
- Remote control: Ethernet
- Power Connector: 2x Neutrik PowerCon 32A
- Operating Voltage: 230V
- Operating Voltage Range: 195 to 260V AC
- Recommended Amperage: 2x20A 205V | 2x16A 230V
- Soft Start: Yes
- Protection: Thermal breaker
- Cooling: Front-to-back, active
- Dimensions: 177.8 x 481.4 x 495 mm (7" x 18.95" x 19.5")
- Weight: 42 kg (92.6lbs)
This item has been listed by a member of our worldwide community. Buying a brokered item like this is the perfect way to purchase hard to find equipment at a great price. All brokered item sales include a 72 hour (3 business days) quality inspection window. Once the item arrives, just let us know if you are unsatisfied- your purchase is guaranteed by UsedLighting.com!
- (2) VHD5.0 Mid Hi Speaker
- (6) VHD8.10 Low Mid Speaker
- (2) VHD5000 Control Amplifier
- (2) VHD5000S Low/Mid Amplifier
A member from our team will reach out to the seller to determine the shipping cost and will contact you with the total cost for your approval. Payment will only be authorized, not processed, until the shipping cost is approved by you. Please note that if the item is being shipped to a country that is outside of the "Ships from" country, you will be responsible for any taxes, duties, or fees associated with your purchase.
Ships from: Switzerland