ARRI T1 1000W Location Fresnel (Black), Stage Pin

The black ARRI T1 1000W Location Fresnel with Hanging Mount is an updated version of the Compact Series of location Fresnels, built for controlled, punchy output on set or on location. Part of ARRI’s True Blue Series, it pairs a compact form factor and reduced weight with high output, making it a practical choice for key, fill, or backlight when you need the familiar Fresnel look and clean beam shaping.

Cooling and Performance for Long Takes

ARRI's cross-cooling system reduces lamp housing temperature by 25% and lens temperature by 17%. With special air channels built into the aluminum extrusion, a constant stream of air passes around the Fresnel lens and into the lamp head, regardless of the tilt angle. This helps support consistent operation when the fixture is aimed high or low and when working for extended periods.

Fresnel Beam Control and Output

When fitted with a 1000W bulb, this fixture will provide a 2.8' diameter beam of 409 fc from a distance of 20' at full spot. At full flood (same distance), it will provide a 48 fc with a 20.4' diameter beam. Focus is adjusted with front- and rear-mounted knobs, so you can quickly move from a tight, defined spot to a broad wash without changing modifiers.

Build, Optics, and Electrical

The optical system uses a 5.9" (150 mm) low expansion borosilicate Fresnel lens with a spherical specular high-purity aluminum reflector for efficient, even projection. It uses a G22 bi-pin socket and is rated for 120 to 240 VAC operation. The fixture is IP23 rated, supporting use in demanding production environments.

Size and Handling

Including yoke and mount, the fixture measures 16.8 x 11.4 x 8.8" (42.7 x 29 x 22.4 cm) and weighs 10.1 lb (4.6 kg), balancing robust construction with location-friendly handling and rigging.